Product Description
Ⅱ LXG- 4/5 Auto Bottle Blowing Machine Feature
2.1 Preform Feeding & Handling system
- Continuous preform feeding system
- Proper preform stabilization time on star-wheel before spindle insertion
- Composite aluminum alloy chain: strong, no wear, no elongations, low maintenance cost
- Self-lubricate bushing and sealed bearing
- Different chain pitch to optimize production based on specific neck finish diameters
- Ejection system for oval or not well inserted preforms
- Quick-change system (option) in less than 5 minutes for different neck diameters: change of loading wheel and loading guides
2.2 Preform Heating System
- Perfect heating system design helps decrease the power consumption.
- Special oven design helps power saving and is easy maintain.
- Preform heating system with laminar flow.
- Low thermal inertia: higher heating process consistency and fast start-up
- Oven dimensions based on preform and max bottle size (from 8 to 16 lamps)
- Modular oven
- Adjustable position for neck change
2.3 Preform Transfer & Pitch Change
- Servo-driven pitch-change system to optimize heating efficiency (oven pitch) and maximum bottle diameter (blowing pitch)
- Simple and reliable system
- Servo-driven unit for same-time preform and bottle transfer
- Precise and gentle preform holding
- Very high transfer speed
- Quick change of personalized parts (tool-less)
2.4 Stretching & Blowing
- Electrically driven blowing clamp, no oil
- Servo-driven motion with levers and oscillator
- High clamp speed
- Double-sided pneumatic compensation
- Servo driven stretch rods
- Fine setting of stretch profile thanks to servo control
- Blow seals, fast and independent for every cavity
- Self-learning of stretch stroke based on preform-bottle size
- High tech blowing valves: fast and independent for every cavity, with individual pre-blow flow regulation
- Very quick exhaust
- Standard Air tanks for peak blowing ramp, providing higher output
- By-pass valve to avoid chilled water when not in production
- Less power consumption once machine is in idle mode or is waiting for downstream
- No condensation on blow moulds once the machine is not blowing bottles
2.5 Bottle Ejection
- Servo-driven unit for bottle discharge
- Discharge on air conveyor or belt conveyor or vacuum conveyor
- Bottle base cooling option
LXG-4/5 machine main parameter
|
|
Item
|
LXG－4/5
|
|
Main machine
|
Maximum Bottle capacity
|
6L
|
|
|
Maximum bottle diameter
|
Φ185mm
|
|
|
Neck diameter
|
Φ25~45mm
|
|
|
Maximum bottle height under neck
|
<380mm
|
|
|
Clamping stroke
|
200mm
|
|
|
Bottom die stroke
|
50mm
|
|
|
Bottle pitch
|
200mm
|
|
|
Maximum output rate (bph)
|
4000
|
|
|
Number of molds
|
4
|
|
Heating part
|
Number of heating modules
|
6
|
|
|
Number of heating lamps
|
9
|
|
|
Number of preform bases
|
108
|
|
Electric part
|
Voltage
|
380V
|
|
|
Frequency
|
50Hz
|
|
|
Service power
|
50~80kw/h
|
|
|
Installation power
|
160kw
|
|
Air source
|
High pressure
|
3.5Mpa
|
|
|
High pressure air consumption
|
12m³/min
|
|
Chilled water
(Water temperature ≤18℃)
|
Pressure
|
2~4bar
|
|
|
Flux
|
4-6m³/h
|
|
Chilled water
(Water temperature ≤30℃)
|
Pressure
|
2~4bar
|
|
|
Flux
|
6-9m³/h
|
|
Weight
|
G.W.
|
Around 10,000kg
|
|
Dimension
|
Main machine (L×W×H)
|
4900×2200×3200mm
|
|
|
Preform unscrambler(L×W×H)
|
2500×2500×3000mm
|
|
Remarks:
* 4000bph output rate base on 4.5L , 110 gram C’estbon water bottle.
* High pressure air consumption depends on PET bottle volume, altitude etc.
* With high-pressure air recycle system.
|
Payment Terms︰
TT
Product Image
